Pathfinder2009 - 3D result is not visualized

[J]

I ran one floor / 343 persons simulation but 3D result is not visualized.
I downloaded patch and manually open behemoth.exe and opened result file but no 3d result has shown.
Please see the attached picture which I captured.

[Charlie Thornton]

When you have a situation where you've got simulation results but the 3D results won't load, it usually means that the TXT file generated by the user interface is not version compatible with the 3D results. You might be able to see exactly where the problem is if you run behemoth.exe from a command line and watch for an error.

This patch you mentioned, is it the pathfinder_jni.dll update for new graphics drivers from a few posts ago, or was it something else? My first suggestion would be to uninstall your pathfinder and install either of the updated versions: Pathfinder 2009.2 (1028) or Pathfinder 2011.0 (0711). I suspect that somehow your 3D results program is out of sync with the UI.

Also, are you able to load the CSV file output? (e.g. on the Results menu, click Room Usage...)

[J]

Thanks for the answer.
I tried 3d with example files and it works but mine was not. I couldn't find any error message from a command line.
I could load CSV file outputs.

where can I update pathfinder-2009? I am not sure that I can use pathfinder-2011 free because mine is 2009 version.
I looked at release note but I couldn't find any links for downloading 2009 update you said.

The patch I mentioned is that you uploaded before at the another post.

[Charlie Thornton]

If the samples work and your model does not, we must have a different problem than I initially suspected. Could you either upload your model here or email it to:

support@thunderheadeng.com

I've sent you a private message with the download page link.